Pharmaceutical Double Skin Air Handling Units
We designed and engineered Double Skin Air Handling Units for
research laboratories, research institutes, hospitals, operation
theaters and other clean-room
Air Flow Range: 600 CFM to 8000 CFM
(standard Models). Higher capacity units are also available.
Total Static Pressure: 40 mm W.G. to 125 mm W.G.
Frame Work: Extruded Aluminum profile with
nylon reinforced 3D corner joints, used to house all internal
components. Double skin sandwiched
panels are fabricated from inside with 0.63 mm (24 ga) G.l. sheet and
outside with 0.63 mm (24 ga)
pre-coated G.l. Sheet. The panels include
sandwiched insulation resulting in high rigidity and sound attenuation
characteristics. The gasket
sealed panels (1" thick) are open-able for quick access.
FAN SECTION: Consists of double-inlet, double-width (DIDW) centrifugal
blowers (indigenous /
imported) and pillow block, self aligning bearings.
Coil Section: Cooling coils (Chilled Water / DX) are made of Copper
pipe and Aluminium fins with
insulated G.l. Sheet drain pan. Aluminium / S.S. drain pan is
optional. All coils are factory tested at
dry air pressure of up to 250 PSI underwater.
Pre Filter: 23 mm pre-filter is provided (10 microns).
Micro-V Fine Filter: Micro filter is provided with efficiency of 99%
for 5 microns.
HEPA FILTER: HEPA filter with efficiency of 99.97% for 0.3 microns is
normally installed at duct
outlet terminals.HEPA filters to be provided at site by the client.
We supply Double Skin Air Handling Units in pharmaceutical industry in
all Over in India
We Mainly Deal In North India Delhi, Punjab, Haryana, Utter Pradesh, Utrakhand, Himachal pradesh, Rajasthan